Samson TROVIS 6495-2, Монтаж и эксплуатация

Страница: 131 / 186

EB 6495-2 EN 16-21
Annex A (configuration guide)
Con-
troller
C.2.1 Set point adjustment
Default
setting
Setting
[1] [2]
C.2.1.5 Physical unit for set points C.2.1.5-1
[1] [2]
-0
Off The unit is
already set
depending
on PV.
Ratio con-
troller:
C.2.1.5-0
[1] [2]
-1
°C Temperature
[1] [2] -2 °F Temperature
[1] [2] -3 K Temperature
[1] [2]
-4
bar Pressure
[1] [2]
-5
mbar Pressure
[1] [2]
-6
psi Pressure
[1] [2]
-7
kPa Pressure
[1] [2] -8 m³/h Flow rate
[1] [2] -9 l/h Flow rate
[1] [2]
-10
ft³/h Flow rate
[1] [2]
-11
kg/h Mass flow
[1] [2]
-12
t/h Mass flow
[1] [2]
-13
lb/h Mass flow
[1] [2] -14 %
[1] [2] -15 mFS Filling level
[1] [2]
-16
mmFS Filling level
[1] [2]
-17
inH
2
O Filling level (inch water column)
[1] [2]
-18
%rF Relative humidity
[1] [2]
-19
kg/m³ Density
[1] [2] -20 pH pH
C.2.1.6 Signal monitoring SPC <C.2.1.2-2> C.2.1.6-0
[1] [2]
-0
Off
[1] [2]
-1
On
[1] [2]
-2
On (with default value)
[1] [2]
SPC.K1 Default value <C.2.1.6-1/-2> [–999.0 ... 9999.0] 0.0
Initial value <C.2.1.2-2>
[1] [2] SPC.TOUT Timeout interface
<C.2.1.6-1/-2> [1 ... 99999 s] 60 s
C.2.1.7 Manual mode controller at signal error SPC
<C.2.1.6≠0>
C.2.1.7-0
[1] [2]
-0 Off
[1]
-1 Constant output value at AO1 <O.1.1-1/-38/-39>
[1]
-2 Constant output value at AO2 <O.1.2-1/-38/-39>
[1] -3 Constant output value at AO3 <O.1.3-1/-38/-39>
[1] -4 Constant output value at SO1 <O.1.4-1/-38/-39>