Samson TROVIS 6495-2, Монтаж и эксплуатация

Страница: 29 / 186

EB 6495-2 EN 3-15
Design and principle of operation
Degree of protection
IP 65 (front), IP 30 (housing), IP 00 (terminals)
according to EN 60529
Device safety
According to EN 61010-1: Protection class II,
overvoltage category II, degree of contamination 2
Electromagnetic compatibility
Requirements according to EN 61000-6-2,
EN 61000-6-3 and EN 61326-1
Mechanical environmental influences
affecting storage, transport and operation
Sinusoidal vibration according to IEC 60068-2-6:
2 to 9 Hz; 3.5 mm amplitude
9 to 200 Hz; 10 m/s² acceleration
200 to 500 Hz; 15 m/s² acceleration
Random and guidance vibration according to
IEC 60068-2-64:
1.0 m²/s³; 10 to 200 Hz
0.3 m²/s³; 200 to 2000 Hz
Shocks according to IEC 60068-2-27:
Acceleration 100 m/s²; duration 11 ms
Electrical connection
Screw terminals 1.5 mm² (0.5 to 1.5 mm² wire
cross-section)
Display Dot matrix display with 132x49 pixels
Display range
–999 to 9999; start value, end value and decimal
separator can be adjusted
Cycle time 50 ms (firmware version 1.11 and lower: 100 ms)
Configuration
Functions saved in read-only memory, configuration
saved in non-volatile memory
Control modes
One or two fixed set point/follow-up control
One ratio control
One cascade control
One ratio and fixed set point/follow-up control
One override control
Weight 0.5 kg
Conformity
·