Sampo Rosenlew Comia c4, Инструкция

Страница: 48 / 141

– 46 –
L11
L10a
L10b
CUTTING AND FEEDING MECHANISM RE-
VERSE DRIVE
(OHFWULFDOO\&RQWUROOHG5HYHUVH'ULYH)LJ
L10a) Eliminates Blockage on the Table
Blockage in crop feed may stop the table auger and crop
elevator. This is cleared by running the feed mechanism
backwards. To do this, disengage the drive to the table
and press reverse switch Fig L10a. The table auger and
elevator will rotate in reverse direction and clear the
blockage.
NOTE! Reverse drive will only operate with the engine
running and switch depressed.
Engaging and Disengaging of
the CUTTING TABLE
The cutting table is engaged and disen-
gaged using switch
Fig. L10b . Pull up yellow switch to
engage the table.
Caution! The cutting and feeding mechanism disen-
gaged using the clutch pedal can start running when,
for instance, feeding disorders are being eliminated
IURPWKHWDEOH7KHUHIRUHDOZD\VVWRSWKHHQJLQHEH
-
IRUHDQ\ZRUNLVFDUULHGRXWRQWKHWDEOH
Supporting of the CUTTING TABLE (Fig.
L11)
Before doing repairs and maintenance beneath the ta-
ble, raise it to its full height and lock the
support over the ram using lever A, on the
right-hand side of the table auger.
Do not use the cutting table sup-
port while driving on the road!