SamplexPower Evolution Series Скачать руководство пользователя страница 96

Страница: 96 / 140

6 | SAMLEX AMERICA INC.

APPENDIX A

SECtION 3 |

Operation

3.0 GeneRAL inFoRMAtion

EVO-RC Remote Control provides the user with the ability to modify EVO

Inverter/Charger’s

operating parameters. The default settings in EVO

Inverter/Charger are adequate for some

installations but may have to be modified for others. This Section provides details on the remote
functions, status and menu maps and displays, fault messages and parameter settings.

3.1 nAViGAtinG tHe ReMote

The EVO-RC provides menu items and adjustable settings to configure your EVO

Inverter/

Charger to your specific parameters. Please refer to the layout at Fig 1.1(a).

•

LCD Display (1)

– The 2-line (16 characters each) LCD display shows status and

information for the EVO

Inverter/Charger. All Setup Menus and faults also appear on

the LCD display.

•

on/oFF Key (2)

– The ON/OFF Key is used for switching ON/switching OFF the EVO

Inverter/Charger.

•

navigation Keys (5, 6, 7, 8)

– These four Keys allow simple access to menu items that

assists configuring, monitoring, and troubleshooting the EVO

Inverter/Charger.

navigation Key Functions



Back

– Return to previous selection



– Move to (i) Upper Reference No. for Status / Parameter Group or (ii) Upper

Reference No. for Parameter Screen in various Menu Maps.



Down

– Move to (i) Lower Reference No. for Status / Parameter Groups or (ii)

Lower Reference No. for Parameter Screens in various Menu Maps.



enter

– Enter the selected option

•

Status

– Green LED indicator for indicating operating status (see details at Section 6,

Table 6.1)

•

Alarm (Fault)

– Red LED indicatorfor indicating fault conditions (see details at Section 6,

Table 6.1)

•

SD Card socket

– This slot supports SD memory card (up to 16GB; FAT 16/32). The

SD Card is used for (i) Data logging of EVO

Inverter/Charger's operational statistics

and events, (ii) Saving and uploading of programmed parameters. See Section 5: SD
Card, and (iii) Upgrading firmware for Evolution

Series (EVO

) Inverter/Charger / EVO

Remote Control EVO-RC.

Содержание Evolution Series













































































































































Результаты поиска

Содержание Evolution Series

Отзывы:

SamplexPower Evolution Series, Руководство пользователя, Страница: 96 / 140

Результаты поиска

Содержание Evolution Series

Отзывы: