Samoa LARIUS GHIBLI MIX 2K, Руководство по эксплуатации и техническому обслуживанию

Страница: 6 / 38

www.larius.com 6
ED. 04 - 04/2021 - Cod. 150183
LARIUS GHIBLI MIX 2K
WORKING PRINCIPLE
The LARIUS GHIBLI-MIX is a bi-component mixing machine.
It therefore provides for the dosage, mixture and application of
double components products. This machine allows the user to
work in low, medium or high pressure, with both airless or mist-
less manual or automatic spray guns.
The dosing and the mixing of the components are regulated by
an electronic control system.
The hydraulic assembly includes two wire encoders, which adjust
the inlet of the two components into the mixing channels.
It is here that product mixing takes place thanks to a static mixer.
The machine is composed of 3 main units:
• Intake for components
• Hydraulic mixing unit
• Command and control unit
B
ADVANTAGES OF USING THE LARIUS GHIBLI-MIX
- The possibility of using every methodology (low-medium-high
pressure / Mist-less / airless painting).
- Increased product savings and consequent waste disposal
savings.
- “Ecological” painting: performed in complete respect for the
working and external environment – Quick drying (even without
a drying oven).
- High quality finish – Less use of paint thinners during cleaning
phases.
- Increased resistance with respect to mono-component paints.
SECTORS OF USE: Generic metalworking, Woodworking and Fur-
nishings, Aerospace industry, plastics, Bicycles and motorcycles,
Automobile components, Automobiles, painting of furniture,
Chairs, Doors, Varnishing, Emulsion painting.
WARNING
BEFORE USING LARIUS GHIBLI-MIX EQUIPMENT
The operator must possess and be familiar with the
data sheets of the 2 components (A and B).
The operator must be familiar with the characte-
ristics of both the wash fluid to be used with the
catalyser B and the wash fluid to be used with the
product A.
A A
T
E
C
H
N
IC
A
L
D
A
TA
T
E
C
H
N
IC
A
L
D
A
TA
B
B
T
E
C
H
N
IC
A
L
D
A
TA
T
E
C
H
N
IC
A
L
D
A
TA
The catalyser and its relative circuit must never be
cleaned with incompatible liquids.
Make sure that: if the product to be used is wa-
ter-based, the relative circuit within the machine
is cleaned using water. If, on the other hand, the
product to be used is solvent-based, the relative
circuit must be cleaned using a solvent.
W ATER
S OLVENT
LARIUS srl SHALL BEAR NO RESPONSIBILITY FOR ANY DAMAGES DERIVING FROM THE USE OF WASH
FLUIDS INCOMPATIBLE WITH PRODUCTS A AND/OR B.
LARIUS srl SHALL BEAR NO RESPONSIBILITY FOR ACCIDENTS OR MALFUNCTIONS DERIVING FROM LACK
OF FAMILIARITY WITH THE DATA SHEETS AND THE PRODUCTS UTILISED OR RESULTING FROM THE USE
OF PRODUCTS WHICH ARE NOT COMPATIBLE WITH ONE ANOTHER.