Samoa LARIUS GHIBLI MIX 2K, Руководство по эксплуатации и техническому обслуживанию

Страница: 30 / 38

www.larius.com 30
ED. 04 - 04/2021 - Cod. 150183
LARIUS GHIBLI MIX 2K
ALARM
FLOW METER ALARM RESET
During system washing functions or colour change,
the Washing solvent flow meter alarm may activate
because the operator did not press one of the above
functions on the paint spray gun within a certain
amount of time.
The DO NOT BLOCK OpERATION alarm on the
machine can only be reset after the washing cycle
or the colour change has been completed.
procedure:
• Exit the page you are viewing by pressing the
exit button.
• A menu with all machine functions will appear.
• Select the ALARM button.
• Press the yellow RESET button (to switch off the
red lamp and acoustic alarm).
• Press the button at the bottom right to reset the
message which will appear in the alarms list.
• Press the ExIT button.
• Press the SETTINGS button to view the settings
in use
1. Emergency:
Reset the push-button.
2. Component A circuit alarm:
Dosing valve A closed,
impulse counting is detected: leakage index. Check
dosing valve A, the recirculation tap, pump leakage.
3. Component B circuit alarm:
Dosing valve B closed,
impulse counting is detected: leakage index. Check
dosing valve B, the recirculation tap, pump leakage.
4. Litre counter A alarm:
Breakage of encoder wire on
pump A1 or A2.
5. Litre counter B alarm:
Breakage of encoder wire on
pump B1.
6. Pump A1 A2 speed alarm:
A higher speed of movement
on pump A1 or A2 has been detected compared to op-
erating values previously stored during normal mixing
operations.
7. Pump B1 speed alarm:
A higher speed of movement on
pump A1 or A2 has been detected compared to operating
values previously stored during normal mixing operations.
8. Circuit A minimum pressure alarm:
pressure value
lower than the set value on the circuit A pressure sensor.
9. Circuit B minimum pressure alarm:
pressure value
lower than the set value on the circuit B pressure sensor.
10. Water flow switch alarm:
No washing liquid passage
detected. Gun not open or pump blocked, after having
exceeded the alarm activation delay time, from washing
launch or colour changing. Washing pump blocked.
Washing pump empty.
11. Solvent flow switch alarm:
No washing liquid passage
detected. Gun not open or pump blocked, after having
exceeded the alarm activation delay time, from washing
launch or colour changing. Washing pump blocked.
Washing pump empty.