WASHING
www.larius.com
28
ED. 04 - 04/2021 - Cod. 150183
LARIUS GHIBLI MIX 2K
On this page, you can set the operating times of the
washes based on the machine configuration. Some
machines has the possibility of a second washing
(Solv. 2) with liquid other than solvent wash 1 (Solv.
1). In some cases we can have air blown between the
washing Solv. 1 and the washing Solv. 2.
Si esegue il lavaggio del miscelatore statico, del tubo
pistola e della pistola stessa, si possono impostare
due fasi lavaggio con liquido di lavaggio (acqua) e
due fasi di lavaggio con solvente intervallate da una
pausa fra una fase e l’altra e da fase di soffiaggio aria.
Washing is activated by pressing the “WASHING”
button with the MAN/AUT selector set to MAN.
The robot places the gun with the nozzle down.
With the gun open, the washing cycle starts and ends
with the washing stop signal.
All the set washing times decrease as long as the flow
meter signals are enabled.
If one of the flow meter signals fails, the count is reset
and then starts again from the beginning.
This function is essential in order to ensure that the
washing liquid or solvent actually passes through the
various circuits to allow cleaning. The flow meter is
the device that is able to recognize, when the spray
gun is open, if the washing liquid is actually passing.
N.B.: If the corresponding flow switch signal for
washing with water or with solvent is missing after
a certain time, the equipment reports the flow meter
alarm acoustically and visually. The operator will
then have to reset the acoustic alarm.
During washing, the panel will display the flashing
message WASHING IN pROGRESS.
Содержание LARIUS GHIBLI MIX 2K
Страница 4: ...I n t e n t i o n a l l y b l a n k p a g e...
Страница 36: ...I n t e n t i o n a l l y b l a n k p a g e...
