Samoa LARIUS GHIBLI MIX 2K, Руководство по эксплуатации и техническому обслуживанию

Страница: 27 / 38

1
2
3
4
5
1 2
3 4 5
6
www.larius.com 27
ED. 04 - 04/2021 - Cod. 150183
LARIUS GHIBLI MIX 2K
SPILLATURA
Quantity of material needed:
Enter the value in
litres of the product.
Requested cycles number
Actual cycles number A:
product A value
Actual cycles number B:
product B value
Start dispence cycle:
key for launching tapping.
OK:
Confirm tapping start.
The MAN/AUT selector (
7
) must be set to MAN.
Take the product at the end of output from the
painting spray gun, which must correspond with
the desired amount of product.
Note: If three-way tapping valves are present
on the machine for tapping, before starting the
tapping cycle:
• Make sure that the counter-pressure nozzles on the
outlet of these valves are clean and not clogged.
• Rotate the valve levers to the horizontal position.
• Position two graduated containers.
• We will find 800 cc. in container A.
• We will find 200 cc. in container B.
• Equal to ratio 800/200 - 4/1.
Function used to verify the amount in volume
of component A and component B with respect
to the set ratio.
Enter the desired amount of product (
1
), example
1 (one) litre. The machine according to the set
contribution (
2
) (for example 4:1) will produce 800
cc of component A and 200 cc of component B
6