J12
J13
K1
ON
www.larius.com
18
ED. 04 - 04/2021 - Cod. 150183
LARIUS GHIBLI MIX 2K
WASHING OF THE NEW EQUIPMENT
• The machine has been tested at the manufacturer’s facilities.
perform a wash cycle with the paint thinner before suctioning
any product.
• place the suction tubes in the solvent containers or else
pour solvent into the gravity tanks.
• Make sure that all of the taps are closed.
• Circulate the solvent within the output pumps and afterwards
within the entire system.
• Open the machine’s intake taps, as well as those at the
flowmeter intake and leave the relative bleeder valves closed.
• Activate an automatic work cycle and circulate the solvent
until it comes out of the machine clean.
• Stop the automatic work cycle and activate a wash cycle.
This cycle will help the user set all of the wash settings so
that that machine will be predisposed to perform future wash
cycles during working phases.
• During the wash cycle, hold the spray-gun (
J12
) over a
container (
J13
) and keep the trigger pulled.
Absolutely avoid to spray solvents indoors.
For disposing of the washing liquid, see the re-
quirements laid down in the Standards in force in
the country in which the equipment is used and
act accordingly.
The Client is solely responsible for any irregular
action taken before, during, or after disposing of
washing liquid, or in interpreting and applying the
current Standards in this regard.
• Now the machine is ready. When water-based paint has
been used, in addition to washing using the cleaning liquid,
we recommend washing with soapy water and then clean
water.
PREPARING THE PRODUCTS
In order to prepare the products
(i.e. for dilution)
, refer to the
supplier’s data sheets.
Make sure the product to be used is compatible
with the materials employed for manufacturing
the equipment
(stainless steel and aluminium)
.
Because of that, please contact the supplier of
the product.
WORKING
K
If it is the first time the machine is used, wash.
The machines are tested and there may be some
oil residues remaining within.
TURNING THE MACHINE ON
Connect the machine up to the current and then to the air line
(supply at minimum 6bar).
Turn the machine on by pressing the switch (
K1
) on th side of the
control box, setting it to ON.
Содержание LARIUS GHIBLI MIX 2K
Страница 4: ...I n t e n t i o n a l l y b l a n k p a g e...
Страница 36: ...I n t e n t i o n a l l y b l a n k p a g e...
