SAMES KREMLIN NANOGUN-MX, Руководство пользователя

Страница: 47 / 99

Index revision : A
索引版本：A
44 7115
•
Step 3: Manually remove the adapter equipped
with its joint and high-voltage resistance by its
spring and pulling on it.
第
3
步：通过提拉移走适配器。
WARNING : Be careful not to damage the
resistance during its extraction.
警告： 当心取出过程中不要损坏电
阻率。
10.6. Paint nozzle needle
10.6.
喷嘴和枪针
•
Step 1: Unscrew the paint nozzle needle in
back of the gun, recover the spring.
第
1
步：拧松喷枪后部的涂料喷嘴针阀，重新
装好弹簧。
•
Step 2: Press on the trigger and pull it
manually towards the back of the paint nozzle
needle.
第
2
步：扣压扳机，向涂料喷嘴针阀后方拉
动。
WARNING : After every 4 or 5 reassemblies, add some red dielectric grease (P/N # H1GSYN037)
within the open channel in the barrel.
警告： 每进行
4
或
5
次重新组装后，在枪身的开缝中加入一些红色绝缘脂
(P/N #
H1GSYN037)
。