Sam4s SPS-500, Руководство по программированию

Страница: 57 / 183

SPS-500 Program Manual v1.31 S Mode Programming

57
System Options
This section is used to define the most fundamental parameters of the whole system such as, how many ECRs
are in the network, which ECR number will store common data, etc.
► Select SYSTEM OPTIONS from the S mode PROGRAMMING MENU to display the S mode SYSTEM
OPTIONS Screen.
S Mode System Options – Definitions
(1) REGISTER # (1-32)
This is the register number for this ECR. This is required to be a sequential number starting from 1 for
each of the ECRs in an inter-register communications system.
(2) STORE #/STORE NAME
This is used during communications to indicate which store sales are collected from. Either a store name,
store number, or both a store name and number can be entered. If store number alone is entered, store
files will be saved on the SD/USB card under the store number; if a store name alone, or if a store name
and number are entered, store files will be saved on SD/USB under a folder with the store name.
(3) IRC FROM REGISTER #
This is the number of the first ECR in an inter-register communications system. The norm is 1.
(4) IRC TO REGISTER #
This is the number for the last ECR in an inter-register communications system.
(5) IRC NUMBER OF RETRIES
The standard setting will be acceptable here, unless directed by CRS Support to use a different value.
This feature controls the number of requests to consolidate a ECR before failure is announced. This is
default to 10 providing optimum network performance.
(6) PRINT DISPLAY DECIMAL POSITION
This is the number of decimal places the system will use.
(7) PASSWORD (0000 – NO PASSWORD)
Each of the reporting areas can be password protected to provide management restriction.
(8) SEND PLU DESCRIPTOR WHEN POLLED
This option must be selected when polling with SAM500.
(9) REG# HOLDS TIME IN/OUT DATA
The time clock, labor hours worked and costing analysis feature can be operated on any ECR, however
the data is held centrally on one register.
(10) REG# HOLDS CHECK TRACKING DATA
The four check tracking files can be operated on any ECR. The files however are stored centrally,
normally on ECR #1. On a more customized system this can be changed so that each tracking file is
stored on a different ECR, the information will be available for central use.