Sam4s SPS-500, Руководство по программированию

Страница: 117 / 183

SPS-500 Program Manual v1.31 P Mode Programming

117
(6) PRINT SBTL WHEN SBTL KEY PRESSED
If Yes, the receipt (if applicable) will print the subtotal at the point in the transaction when the key was
pressed.
(7) VALIDATION PORT# (0-6)
Indicate the port on the register that is connected to the validation printer.
(8) DISPLAY RUNNING SUBTL ON POLE
Allows the pole display to show a running subtotal as items are entered.
General Printing Option Definitions
(1) PRINT ON RECEIPT:
EMPLOYEE
NAME
CONSECUTIVE #
ITEMS BY GROUP
DATE
TIME
PREAMBLE/POSTAMBLE
ORDER
#
SEAT #
Determine the content of each receipt by selecting Yes or No for each item.
(2) RECEIPT FEED LINES AFTER PRINT
Enter the number of lines you wish to feed after each receipt is printed. (Makes chit larger.)
(3) LINES AFTER PREAMBLE
Enter the number of lines you wish to feed after the preamble and before the first receipt print line.
(4) LINES BEFORE POSTAMBLE
Enter the number of lines you wish to after the last receipt line and before the postamble.
(5) BUFFERED RECEIPT: STUB / FULL
A stub receipt contains only the total, tender and transaction information. A full receipt includes item
detail.
(6) PRINT RECEIPT WHEN SIGNING ON/OFF
If Yes, a receipt is printed whenever an employee signs off or on.
(7) PRINT RECEIPT WHEN CLOCKING IN/OUT
If Yes, a receipt is printed whenever an employee clocks in or out.
(8) CONDENSE TRAY SBTL RECEIPTS
Prints each separate tray subtotal receipt without preamble/postamble.
(9) DETAIL: REAL TIME / BATCH
Prints detail (journal) on journal printer (or updates electronic journal) line by line (real time) or at
transaction finalization (batch).
(10) PRINT PLU CODE WITH DESCRIPTOR
If Yes, both the PLU# and descriptor will print when a PLU is registered.