36
•
Getting Started
Sam4POS 6600/4800II Operators Manual v2.9
Initial Clear
The initial clear function allows you to exit any register activity and return to a beginning or cleared state.
No program data is lost by performing this operation.
1.
In versions 1.0.26 and later: Tap the
Version
information, in the lower right corner, three times to
initial clear the SAM4POS terminal.
(In versions before 1.0.26: tap the SAM4s logo displayed on the
main sign on screen three times.)
2.
The Notification dialog below is displayed:
3.
Press
YES
to proceed with the initial clear; or press NO to exit without the initial clear.
4.
Sign on to the Sam4POS as normally.
Reboot
1.
To Reboot the SAP-6600/4800 Sam4POS, use the main power button on the lower right bottom of
display to power
OFF
the Sam4POS terminal.
(Right side rear, on the SAP-630/530.)
2.
Press the confirmation
‘Power off’
dialog to continue.
3.
When the Sam4POS is completely shut down, press the power button again to power on the Sam4POS
terminal.
4.
The Sam4POS will reboot to the main sign on screen.
Note: If you reboot while a transaction is in progress, the transaction will be aborted and totals/counters
will not be updated.
