Sam4s ER-260EJ, Руководство по эксплуатации и программированию

Страница: 32 / 229

32 • Operations Sam4s ER-260EJ/256EJ OP Manual v1.20
Clerk Operations
The number of clerks available is determined by memory allocation. (The default configuration
provides 10 clerks.) See “Memory Allocation” on page 88 to set the number of clerks as well as other
memory variables.
You can choose a direct sign-on or code entry clerk system:

You can provide maximum security in a multiple clerk system with the code entry
system. Enter the clerk secret code, and then press the
CLERK key to sign on the
register.

You can sign off a clerk by entering 0 , then pressing the CLERK key.
You can also select stay down or pop-up mode for clerk operation:

Stay down means that once a clerk is signed on, the same clerk will remain signed on
until the clerk signs off. A stay down clerk system might be used when only one operator
uses the register at a time and a different operator begins when a work shift is changed.

Pop-up means that the clerk is automatically signed off at the end of each transaction. To
begin a transaction, you must first sign a clerk on. A pop-up clerk system might be used
in a department store, where several clerks use the register during the same shift and clerk
sales information is required.
See “SYSTEM” of "Options Programming" in the “Program Mode Programming” chapter to set clerk
options.
Clerk Sign on Instructions
When a clerk is not signed on, the message "CLOSED" is shown on the display. Note that the current
clerk must be signed off before a new clerk can be signed on.
Direct Sign-on
CLERK#
Clerk # (1-10)
Code Entry
CLERK#
Clerk Code (up to 6 digits)
CLERK#
Clerk Sign off Instructions
CLERK # 0