Sam4s ER-260EJ, Руководство по эксплуатации и программированию

Страница: 190 / 229

190 • Integrated Payment Appendix Sam4s ER-260EJ/256EJ OP Manual v1.20
Charge Key (1-8) Options
Option Entry Description
1 DESC Alpha numeric
24 character You can program a unique descriptor. The default descriptors
are CHARGE 1-8.
2 HALO 7-digit amount You can limit errors by setting the maximum amount that can be
tendered. "0" means that there is no entry limit.
3 AMOUNT TEND
COMP. Y or N Select Y if you want to force the operator to enter the tendered
amount and let the register calculate the change.
4 OVER/UNDER
TENDER IN MGR
CONTROL Y or N Select Y if you do not want the operator to tender more than the
amount of the sale and issue change. When selected, over
tendering is allowed only in the MANAGER MODE.
5 DISABLE UNDER
TEND. Y or N Select Y if you do not want the operator to tender less than the
amount of the sale.
6 DOES DRAWER
OPEN Y or N Select N if you do not want the drawer to be opened with this
key.
7
ALLOW OVER
TEND.
Y or N
Select Y if you wish to allow tender greater than the amount of
the sale.
8
NON-ADD # ENTRY
COMPULSORY
Y or N
Select Y if you wish to enforce the entry of a non-add number
prior to tendering.
9 -
12 EXEMPT TAX 1 –
TAX4
Y or N
Select Y to exempt the appropriate tax automatically when
finalized with this key.
13 COMPULSORY
VALIDATION
Y or N Choose Y to enforce validation if an optional printer with
validation capability is connected to a Serial port.
14 SEND TO EFT Y or N Set to Y for integrated payment EFT/EMV operations.
15 EFT PORT (0-3) [0-3] Enter the port # where the integrated payment device is
connected.
16 ALLOW ROUNDING Y or N Select Y if you wish to allow rounding when pressing the
CHARGE 1~CHARGE 8 key.
Always N for EMV
17 SELECT CARD
TYPE
[Card Type] None, Credit, Debit, Gift, Gift No NSF, Cash Benefit
18 SHOW TIP ON
(See ** Note: below)
[Selection] REG
PINPAD
PRINT TIP LINE ONLY
** Note: Before selecting charge key option 18 setting, determine the Transaction Type (type of card) and
when tips are to be entered :

If the card is a CREDIT card, and the draft will be presented to the customer and the tip will be added
later from the TIP OPERATION function of the DATATRAN OPERATION menu, select (PRINT TIP
LINE ONLY).

If the card is a CREDIT card, and all payments are made at a cashier station, choose (REG) to prompt
for tip entry on the ECR display; choose (PINPAD) to prompt for tip at the PIN-Pad.