208 • Integrated Payment Appendix
Sam4s ER-260EJ/256EJ OP Manual v1.20
Issue Batch Status
The Local Batch Status Report also prints when a batch is closed.
1.
Turn the control lock to the
Z
position.
2.
Press
5
and
CASH
to select the Datatran Function menu.
3.
Press
6
and
CASH
to initiate the Issue Batch Status.
DATE 05/16/2017 MON TIME 10:29
**** LOCAL BATCH STATUS ****
BATCH STATUS : OPEN
BATCH NUMBER : 0024
TRANSACTION CNT : 7
ITEM COUNT : 7
BALANCE AMNT : 116.00
FWD ITEM COUNT : *
FWD BALANCE AMNT: *
CLERK 1 000065 00000
Dial In Load
This procedure must be done at each new installation to load the Datatran device parameters. An
active Internet connection is required for this operation
1.
Turn the control lock to the
Z
position.
2.
Press
5
and
CASH
to select the Datatran Function menu.
3.
Press
7
and
CASH
to initiate the Dial In Load.
4.
The message: “ENTER DEVICE ID” displays.
5.
Enter the 6-digit serial number of the IP Tran or PDC. The device will call Datacap’s host PC
and load itself. This takes approximately 20 seconds. During the load the register will display:
“WAITING FOR EFT”.
6.
When complete the message: “LOAD SUCCESS” will display and print. The Datacap device
load is complete.
After the Datacap device is loaded, you must load the PIN-Pad parameters; From the
Z-Mode
. See the “Parameter
Download” on page 206 for details.
Содержание ER-260EJ
Страница 10: ......
Страница 78: ......
Страница 183: ...Sam4s ER 260EJ 256EJ OP Manual v1 20 Integrated Payment Appendix 183...
Страница 184: ...184 Integrated Payment Appendix Sam4s ER 260EJ 256EJ OP Manual v1 20 Configurations...
