Salus PCSol 300, Инструкция по установке и эксплуатации, Страница: 37 / 56

37
18. APPLICATION SCHEMES
18.1. Solar Application scheme A
Loading of DHW reservoir from collector.
Fig. 18.1 Schemat aplikacyjny A
Installation notes
1. For the controller to count heat output, install additional CT6 sensor on the outlet of lower pipe coil
from DHW reservoir and connect to
T4 input (or T3 for Basic ). The sensor must be installed
possibly near the connector pipe.
2. T3 sensor shows temperature in upper part of the reservoir, its connection is not required. In
Basic version it is used only for heat output counting.