Salicru SLC TWIN RT series, Руководство пользователя

Страница: 41 / 52

41
SALICRU
6.4.1. Operating on ECO mode.
6.4.1.1. Short description of the ECO mode.
Ŗ "ECO mode" function allows supplying the load/s from mains
directly, through the internal filters only, meanwhile the en-
ergy is inside the limits, so the UPS allows an "Economy
mode" and with high efficiency > 0,97.
Ŗ When mains is out of tolerances (voltage and/or frequency),
or there are mains failures or blackouts in the power supply,
the UPS will transfer to "Normal mode" or "Battery mode"
depending on the case and the load/s will be supplied in a
safety way.
Ŗ Nevertheless, the disadvantages are:
ˆ
Load can't be protected at 100 %, because on "Line
mode" the load/s are supplied from commercial mains
directly and through the internal filters of the bypass.
ˆ
The transfer time of the "ECO mode" to "Battery mode" is
10ms approximately.
Therefore, this function is not suitable for some sensitive
loads or areas with unstable power supply.
6.4.1.2. To establish the ECO mode function.
Ŗ The function can be activated or deactivated through the
“Setting” submenu (see section 6.3.7).
6.5. Operating as frequency
converter.
6.5.1.1. Short description of the frequency
converter function.
Ŗ In the converter mode, the static bypass is disabled and any
of the operating modes of itself, because the input and output
frequencies are different (50 or 60 Hz). When input mains
fails, either due to a blackout or wrong, the equipment will
transfer to “Battery mode” to supply the load/s properly.
Ŗ The output frequency is set to the preset value and required
by the loads. Nevertheless, the contra is the capacity of the
UPS, which is derated up to the 60% of the nominal in the
"Converter mode”.
6.5.1.2. To establish the Converter mode
function.
Ŗ The function can be activated or deactivated through the
“Setting” submenu (see section 6.3.7).