Salicru SLC TWIN RT series, Руководство пользователя, Страница: 17 / 52

17
SALICRU
of the battery pack and the equipment depends on it.
Ŗ Put the blocking cover back for the battery pack and its fixing
screws.
If this cover is not properly fixed against the metallic chassis,
check that the battery pack is completely inserted.
Ŗ Put the beautiful front/s cover back depending on the equip-
ment, according to the described procedure in section 4.2.5.2..
Power rate models from 4 to 6 KVA. Power rate models from 8 to 10 KVA.
Blocking cover for battery pack
Blocking cover for battery
packs
Handle for battery pack
Handle for battery pack
rack
Fig. 4. Battery pack/s removing.
4.2.5. Vertical -tower type- or rack
models.
Ŗ All the UPSs from SLC TWIN RT series are designed to as-
semble the equipment as tower format -vertical position of
the equipment- or rack -horizontal position- for its installation
in 19" cabinets.
Follow the instructions stated in the sections related to any
of both possibilities, attending the particular configuration of
your equipment.
Ŗ Figures from 5 to 10 show as an example an equipment up to
3 kVA. These illustrations are only for help and orientation in
the steps to follow and they are not particular for any model,
because in practice, the actions to make are the same for all
models up to 6 kVA.