38
Press
> 1 sec.
Press
o
< 1 sec.
Event logger structure menu
Main menu structure
Press
< 1 sec.
Fig. 35.
Event logger submenu screens.
Press
> 1 sec.
Press
o
< 1 sec.
Measurement submenu
structure
Main menu structure
Press
< 1 sec.
Fig. 36.
Measurement submenu screens.
6.3.3. Data logger submenu.
Ŗ
When pressing the key
for less than 1 sec. from the "Event
log" screen, it is accessed to the event data logger structure
(see figure 35).
Ŗ
Alarm and faults data logger is registered in this submenu
and each one includes the event code, as well as the period
of time that the UPS was running under these conditions.
Ŗ
When pressing the keys
or for less than 1 sec. the
next and previous events can be checked depending on the
pressed key. The system is cyclic so you can move in both
directions.
The maximum quantity of registers of the data logger is 50,
so a new input will delete the oldest register.
Ŗ
When pressing the key
for more than 1 sec., the LCD
panel will display the screen "Event log" from the main menu
structure again.
6.3.4. Measurement
submenu.
Ŗ
When pressing over the key
for less than 1 sec. from
"Measurement" submenu, it is accessed to the measure-
ments structure (see figure 36).
Ŗ
From this submenu the following information can be ob-
tained:
Input voltage and frequency.
Output voltage and frequency.
Output current and load level connected in %.
Supplied power at the output in W and VA.
Ambient temperature in centigrade degrees (ºC) and
Fahrenheit (ºF).
DC bus voltage.
Battery voltage and battery charge level.
Ŗ
When pressing the key
for more than 1 sec., the LCD will
display the "Measurement" screen from main menu structure
again.
USER MANUAL
Содержание SLC TWIN RT series
Страница 2: ......
Страница 49: ...49 SALICRU...
Страница 50: ...50 USER MANUAL...
Страница 51: ...51 SALICRU...
