Salicru SLC ELITE MAX Series, Руководство пользователя и инструкция по установке

Страница: 23 / 40

- 23 -
UPS in normal operating mode
3.2.1.- UPS failure.
In case of UPS failure, the status screen is replaced by the alarm ones.
There is a message informing the user about the occurred failure type and the buzzer is turned on but it can be silenced by
pressing the key ESC. When the key ENTER (< >) is pressed a signal list is showed to help the user to understand the
meaning of the alarm. The keys <BACK or NEXT> allow moving through the list. When the alarm condition disappears, the
UPS ALARM ALARM CAUSE
< ENTER>
< BACK or NEXT>
Tab 3
MESSAGE MEANING
CORRECT MAINS / OUT OF RANGE
The input mains is present but the voltage is out of the
specified range
CORRECT BYPASS LINE / OUT OF RANGE
The bypass line mains is present but the voltage is out
of the specified range
CORRECT BATTERY VOLTAGE The battery voltage is inside the specified range
INVERTER ON The inverter is ON and it is in normal operating
INVERTER-BYPASS SYNCHRONISED /
NOT SYNCHRONISED
Indication of the synchronism status between the
inverter and bypass
LOAD ON INVERTER The inverter feds the load
LOAD ON BYPASS
The bypass feds the load. It is a temporary situation of
20 seconds due an overload detection.
UPS MASTER It controls the UPSs connected in parallel
UPS SLAVE It is controlled by another UPS in parallel.