Sakura Tissue-Tek Xpress x120 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 82

Sakura Tissue-Tek Xpress x120 Скачать руководство пользователя страница 41

Revised 10/02/2012

4.9

Retort Icon (Ready) – indicates the associated
retort is ready to accept a basket or magazine set.

Loading Station Icon (Yellow) – indicates the
Preprocessing Solution Time has expired.

Retort Icon (Emptying) – indicates reagent is being
drained from the associated retort prior to receiving a
basket or magazine set.

Retort Icon (Filling) – indicates a basket or
magazine set has been transferred to the retort, and
the retort is being supplied with reagent.
Retort Icon (Emptying) - indicates reagent is being
drained from the associated retort prior to transfer-
ring the basket or magazine set to the next retort.

Retort Icon (Processing) – indicates the basket or
magazine set in the retort is currently undergoing
processing.

Unloading Station Icon (Empty) – indicates the
associated Unloading Station is currently empty, and
is ready to accept a basket or magazine set.

Unloading Station Icon (Complete) – indicates a
basket or magazine set has been transferred to the
associated Unloading Station, and the processing
cycle for the basket or magazine set is complete.

Tabular data shown below the graphical display pro-

vides additional information related to the current status of
the basket(s) or magazine set(s) being processed. The
following information is provided:

•

START TIME – shows the time at which the bas-
ket or magazine set was picked up from the
Loading Station and transferred to a retort. This
field is blank if a basket or magazine set is not
currently in the associated retort.

•

END TIME – shows the time at which the basket
or magazine set is scheduled to be transferred
into the Unloading Station, completing pro-
cessing.

•

STATUS – identifies the current state of the as-
sociated retort, as follows:

LOADING STATION STATUS

EMPTY

The Loading Station is currently empty and is
ready to accept a basket or magazine set.

WAIT

A basket or magazine set is currently in the
loading station, and is undergoing prepro-

cessing or awaiting transfer to Retort #1 under
control of the instrument’s scheduling program.

RETORT STATUS

READY

The associated retort is ready to accept a
basket or magazine set.

EMPTYING

Reagent is being drained from the associated
retort prior to receiving a basket or magazine set.

EMPTY

Reagent has been drained from the associated

retort, and the retort is ready to receive a
basket or magazine set.

FILLING

A basket or magazine set has been transferred
to the associated retort, and the retort is being
supplied with reagent.

PROCESS

The basket or magazine set in the associated
retort is currently undergoing processing.

SHORTAGE Indicates there is insufficient reagent volume to

process the next basket or magazine set.

UNLOADING STATION STATUS

EMPTY

The associated Unloading Station is currently

empty, and is ready to accept a basket or
magazine set.

COMPLETE

A basket or magazine set has been transferred
to the associated Unloading Station, and the

processing cycle for the basket or magazine
set is complete.

The following information is available when the opera-

tor touches the associated icon.

•

TIME LEFT – shows the time remaining until the
associated basket or magazine set is transferred
to the next station.

•

TEMPERATURE – shows the current tempera-
ture of the associated retort. This field is blank for
the Loading Station.

•

CASSETTES – shows the number of cassettes
contained in the basket or magazine set in the as-
sociated retort if

REAGENT CONTROL is set for

CASSETTES.

«
...
39
40
41
42
43
...
»

Содержание Tissue-Tek Xpress x120



















































































Отзывы:

Нет отзывов