10
All
Volu-Matic 200
machines are factory equipped with side, front, and rear guards. The top of the machine does
not require guarding when correctly mounted in the contractor’s truck, as shown in the installation instructions.
The front guard
1
is designed to hinge up for access to your machine for maintenance and troubleshooting.
This
guard must never be opened while your Volu-Matic 200 machine is in operation - there are shafts under the
guard, which are still rotating.
If this guard is opened, a safety switch
2
is mounted to the guard which will stop
chain driven mechanisms, plus the blower, and the engine for those models.
If the mechanisms do not shut off or
stop when the guard is lifted up, you should request that maintenance be performed on the safety interlocks.
For PTO models, you will have to push the reset button 3 in order to restart the machine after the guard is closed.
If the safety switch or guard should become damaged, replace them to ensure safety while operating your
Volu-Matic 200
machine.
1
2
5
4
Содержание CertainTeed Volu-Matic 200
