SAINT-GOBAIN CertainTeed Volu-Matic 200, Руководство по эксплуатации и информация по безопасности

Страница: 13 / 52

13
PRELIMINARY CHECKS
1. Check the following table for the proper hose size, type, and length for a particular operation. All hose
couplings must be thin wall, 1/16 inch maximum, to minimize restrictions. Thin wall couplings can be
purchased from CertainTeed Machine Works.
Note: Follow fiber manufacturer instructions for hose setup
2. Make sure hopper is free of foreign materials.
3. Check for presence of oil from the blower, transmission, and gearbox indicating a leak. On engine models,
check for presence of oil from engine indicating a leak. Check the maintenance section for proper levels
and type of oil used in each component.
4. Check material conditioning slide and air bleed valve position. Check the recommended start settings
chart for proper position.
5.
Make sure all guards are in place and securely latched.
WARNING: always operate your machine with the truck sitting on a level surface. Operating the machine
when the truck is not level will lead to failure of some machine components. The oil level in the blower,
transmission, and gearbox, may not lubricate internal parts properly when the truck is sitting on an incline.
OPERATION MATERIAL HOSE DIAMETER HOSE LENGTH
Open Blow
Cellulose
Fiberglass
Rockwool
3-1/2" Minimum 150' Minimum
Side Wall
Cellulose
Fiberglass
Rockwool
2-1/2" Minimum
3" Minimum
3" Minimum 150' Minimum