Sailrite Craftool Pro Stitch Master Скачать руководство пользователя

Страница: 46 / 47

2-YEAR

Limited Warranty

Sailrite will do their best to satisfy every support

request accurately, completely and in a timely fashion.

The Stitch Master Sewing Machine comes with

personalized support for the lifetime of the machine

and motor. A 2-year limited warranty, to the original

purchaser, covers replacement parts (excluding

consumable items, like needles) starting at the date

of sale. Sailrite support comes in several forms and

generally in this order (as required):

1. Creation of a support case to be assigned to a

machine technician.

2. Email answers with relevant videos for resolution.

3. Phone support with a qualified technician.

4. Shipment of warranty parts for user installation.

5. Repair/service of actual product at our facility.

In the event that a machine must be sent in for

repairs/service, the machine owner will pay to return

just the machine head, insured, to Sailrite in Indiana

(or motor, etc.). Sailrite will pay the return shipping

after resolution of any issues that cannot be solved in

steps 1 through 4 above. The warranted component

should be shipped in the original packaging to

ensure safe transport. This policy is exclusive to

the contiguous United States and Canada. Sailrite

will work diligently to solve issues with machines in

more distant locations to avoid shipping issues. But

should shipping be required, shipping charges will be

the machine owner’s responsibility. Sailrite will ship

warranty parts at no charge, regardless of destination.

The Stitch Master Sewing Machine and Sailrite Workhorse Servo Motor’s limited warranty does not cover any damage

that results from improper installation, accident, abuse, misuse, natural disaster, insufficient/excessive electrical supply,

abnormal mechanical or environmental conditions, wear and tear resulting from normal use of the product, or any

unauthorized disassembly, repair, or modification. This limited warranty does not extend to any indirect, consequential or

incidental damages that may be suffered by a user or from the use of the motor, including without limitation, any liability for

third party claims for damage, and is limited to the amount paid by the original purchaser with respect to which this limited

warranty protection applies. This limited warranty does not apply with respect to products that have been altered or which

are missing serial numbers or for products not purchased directly from Sailrite or a dealer authorized by Sailrite. Tandy

Leather, Inc. is Sailrite’s authorized Stitch Master dealer. Any product returns/exchanges must be done with the original

machine seller in accordance with their policies. Stitch Master Sewing Machines purchased from Tandy Leather must be

returned/exchanged at Tandy Leather. Likewise, a machine purchased through Sailrite must be returned to Sailrite. Product

support and service is provided by Sailrite Enterprises, Inc.

Warranty and Customer Service Policy

Customer Service Questions or Concerns

Support: Sailrite.com/stitchmaster

Email: [email protected]

Stitch Master Speed Settings

SPEED

SETTING

WORKHORSE

SPM

100

110

119

128

137

146

155

165

SPEED

SETTING

WORKHORSE

SPM

174

183

192

201

210

220

229

238

247

256

265

275

284

293

SPEED

SETTING

WORKHORSE

SPM

302

311

320

330

339

348

357

366

375

385

394

403

412

With Sailrite

Power Plus™ Flywheel and Workhorse™ Servo Motor with 21-Tooth Pulley

Stitch Master

Guidebook: Specifications

Содержание Craftool Pro Stitch Master
















































Результаты поиска

Содержание Craftool Pro Stitch Master

Отзывы:

Похожие инструкции для Craftool Pro Stitch Master

Бренды по названию

Популярные бренды

Sailrite Craftool Pro Stitch Master, Руководство пользователя

Результаты поиска

Содержание Craftool Pro Stitch Master

Отзывы:

Похожие инструкции для Craftool Pro Stitch Master

Бренды по названию

Популярные бренды