Changing Motor Rotation
Do not run the Workhorse™ in a clockwise
direction as it will bind the sewing machine and
cause other problems. Make sure the motor is
always running in a counterclockwise direction.
If the motor shaft is spinning clockwise, follow
the instructions below to reverse the direction.
1.
Press the “P” button 4 times until the LED
display reads “n3”.
2.
Press the “S” button to select between “0”
and “1”.
3.
Select “1” and the motor will run clockwise.
4.
Select “0” and the motor will run
counterclockwise (this is the setting the
motor should be on).
5.
Press the “P” button to save the selection
of “0”.
Insert Support Pin and
Thread Stand Post
1.
Locate the support pin (
A
) and thread
stand posts (
B
and
C
) (
34
). The longest
thread stand post with looped end (
C
)
will drop into the back corner hole on the
tabletop. Gently tap the non-tapered end
of the short post (
B
) in the table top corner
hole just in front of the taller post. The
support pin (
A
) goes in the remaining hole,
and is used to rest the machine on when it
is tipped back (
35
).
34
35
A
C
B
Stitch Master
®
Guidebook: Assembling the Stitch Master
20
19
