To change the motor speed:
1.
Press the “P” button and the LED display
will change to “n0”.
2.
Press the “S” button to select a speed.
3.
Continue to press the “S” button until
the desired speed between 5 and 45 is
displayed. See p. 85 for speed settings.
4.
Press the “P” button to save the
displayed speed.
Once a setting is selected and saved, the
motor will remember the selection even when
turned off and unplugged. Set it once and
forget about it! The default setting is 30.
Motor Speed Adjustment
Depending on the type of project you are sewing you may want to change the top
end speed of the machine. A slower speed is generally better for sewing more
intricate projects, while a faster speed may be better for sewing larger project.
Removing Material from
Under the Presser Foot
1.
Stop the machine with the needle at its
upward most position (
60
).
2.
Raise the lift lever (p. 34,
54
).
3.
Pull the material straight back to remove it
from under the foot (
61
). It may be helpful
to rock the Power Plus™ Flywheel forward
and back to free the thread from the
tension assembly.
4.
Cut the two threads to free the material,
leaving at least 3 inches of length of
thread coming out of the machine.
60
61
Stitch Master
®
Guidebook: Using the Stitch Master
40
39
