Install Sewing Machine
and Belt Bracket
1.
Remove the sewing machine from its
styrofoam shell and place the face of the
machine on a soft, flat surface. Loosen the
hinge hole set screws (
A
) so that the holes
(
B
) are not obstructed.
2.
Remove the long screw (
C
) from the head of
the sewing machine (
23
). Take the smaller
part of the belt cover assembly (
D
) and
secure with the screw (
C
) as shown (
24
).
3.
Carefully lift the sewing machine and place
the hinge holes (
B
) over the hinge pins
of the hinges previously screwed to the
tabletop (
25
). Allow the sewing machine to
slide all the way back/down on the hinge
pins and rest the machine on the tabletop.
Tighten the set screws (
A
) (
26
). Pivot the
sewing machine upright.
23
24
25
26
27
28
C
D
F
A
B
A
G
H
E
E
Attach Power Plus™ Flywheel
1.
Set the Posi-Pin
®
(
E
) aside and unscrew
the reverse-threaded Posi-Pin Nut (
F
) (
27
).
Slide the Power Plus Flywheel (
G
) onto the
Posi-Pin Wheel Bushing (
H
) and rethread
nut, spinning counter clockwise. Push the
Posi-Pin (
E
) into the center hole of the Nut
for safekeeping (
28
).
Stitch Master
®
Guidebook: Assembling the Stitch Master
16
15
