SAGEMCOM MF 5591DN, Руководство пользователя

Страница: 74 / 96

74 Sagemcom · MF 5591dn
EN
UPDATING FIRMWARE
Updating Firmware
Updating Firmware
The firmware defines the basic functions and capa-
bilities of your device. Sometimes also referred to as
the device driver. We constantly strive to implement
improvements and innovations. Check our homepage
www.sagemcom.com for information on the current
firmware version available for your device.
Do not interrupt power supply
Settings will be Deleted
1 Load the firmware from the specified internet
page and save the file directly in the root directory
of the USB storage medium (= highest directory
level). The file shall not be saved in a folder.
2 Connect the USB storage medium with the
firmware file to the USB host connection port.
3 If the device detects the firmware file, a message
appears on the display. Press
o
to update
firmware.
4 This process can take a few minutes. The devices
re-boots twice. On completion of the procedure,
the device starts the initial installation process
(see also section
Initial installation , Page 16).
Removing USB Storage Media!
CHANGING THE TONER
CARTRIDGE
Toner Level Memory
Your device registers the extent of toner used for
every print-out and calculates the toner level of the
toner cartridge on that basis. The toner level is
stored in each toner cartridge. You can use different
toner cartridges as well as display the respective
toner level of the toner cartridge.
Toner Cartridge 3
Use Original Consumable Materials!
Observe Packaging Instructions
Notice
CALLING THE WEB INTERFACE
You can also edit the device firmware with
the device's web interface (see also the
chapter
Web Interface , page 20).
CAUTION!
DO NOT INTERRUPT POWER SUPPLY
Do not switch the device off during the print
process and do not unplug the device from
the power supply. If the Firmware update is
not carried out error-free, your device will
probably no longer function properly.
Wait until the firmware update is com-
pleted before performing more operations
on your device.
CAUTION!
SETTINGS WILL BE DELETED
By implementing the Firmware update, all
changed settings on the device are deleted
and restored to factory settings.
CAUTION!
USE ONLY ORIGINAL FIRMWARE
When carrying out a Firmware update
only use the Firmware file for your
device from the website: www.sagem-
com.com. Using other Firmware files can
lead to your device not functioning prop-
erly. Sagemcom accepts no liability for
device malfunctions which can be traced
back to the use of third party Firmware.
CAUTION!
REMOVING USB STORAGE MEDIA!
Never pull out the storage medium while
the device is accessing it. If the Firmware
update is not carried out error-free, your
device will probably no longer function
properly.
DANGER!
ESCAPING TONER DUST!
Never open a toner cartridge. If toner dust
is released into the air, you should avoid
allowing it to contact your skin and eyes.
Do not inhale the released toner dust.
Remove the toner dust from clothing or
objects with cold water; hot water would
only cause the toner to set. Never remove
loose toner dust with a vacuum cleaner.
CAUTION!
USE ORIGINAL CONSUMABLE MATERIALS!
Use only original consumable materials.
These are available from a specialised
retailer or through our order service. Other
consumable materials can cause damage to
the device.
CAUTION!
OBSERVE PACKAGING INSTRUCTIONS
Follow the instructions on the packaging of
the consumable materials.