SAGEMCOM MF 5591DN, Руководство пользователя

Страница: 69 / 96

Telephone Lines and Additional Devices · Switching Caller Line Identification (CLIP) On/Off 69
EN
13TELEPHONE LINES AND
ADDITIONAL DEVICES
SWITCHING CALLER LINE
IDENTIFICATION (CLIP) ON/
OFF
Function is not supported in all countries and networks
(Function is not supported in all countries and net-
works)
CLIP Definition
The number of an incoming call appears on the dis-
play. For this function to work, the Calling Line Iden-
tification Presentation (CLIP) must be activated for
your telephone line. Enquire with your telephone
company. Caller Line Identification may be associ-
ated with a fee.
Setting the Country Correctly
1 Press
C
,
057
and
OK
.
2 Use
[
to select whether you would like to turn
the function on or off.
3 Confirm with
OK
.
SELECTING THE DIALLING
PROCESS
Function is not supported in all countries and networks
(Function is not supported in all countries and net-
works)
In some countries you can set the dialling mode to
pulse dialling or tone dialling (DTMF tones).
Selecting the Dialling Process
1 Press
C
,
053
and
OK
.
2 Use
[
to select the desired dialling process.
3 Confirm with
OK
.
SET UP THE PUBLIC SWITCH
TELEPHONE NETWORK (PSTN)
Function is not supported in all countries and networks
(Function is not supported in all countries and net-
works)
Public Switch Telephone Network (PSTN)
Set up the Public Switch Telephone Network (PSTN)
Your device is automatically adjusted to the tele-
phone network if you set the country correctly (see
also chapter
Selecting the Country , page 61). It is
possible that further settings are required for the
Public Switched Telephone Network (PSTN). Ask
your retailer or the technical customer service
department.
1 Press
C
,
032
and
OK
.
2 Select the desired setting using
[
.
3 Confirm with
OK
.
SET UP PRIVATE BRANCH
EXCHANGE (PABX)
PABX Systems
Private branch exchanges (PABX) are typical in many
offices and some households. You must dial an out-
side line access code in order to get a connection to
the public telephone network (PSTN) from a PABX.
Additional Telephone No Extension
Set up Private Branch Exchange (PABX)
You can set up your device for operation on an exten-
sion, indicate the length of the internal numbers
(direct dial number) and save the code which must be
selected in order to reach the Public Switched Tele-
phone Network (PSTN) (= outside line access code).
Outside Line Access Code is Automatically Dialled
Notice
SETTING THE COUNTRY CORRECTLY
If the Caller Line Identification does not
work even though the function is activated
for your telephone line, check if you have
set the correct country (also see
Chapter
Settings , page 61)
Notice
SELECTING THE DIALLING PROCESS
Only use pulse dialling if tone dialling is not
yet activated for your telephone line.
Notice
PUBLIC SWITCH TELEPHONE NETWORK
(PSTN)
You can use this function to set your device
to connect to the Public Switch Telephone
Network (PSTN). To connect to a Private
Branch Exchange (PABX) see also chapter
on
set up Private Branch Exchange (PABX)
, page 69.
Notice
ADDITIONAL TELEPHONE NO EXTENSION
An additional telephone connected to the
device on a telephone socket is not consid-
ered an extension.
Notice
OUTSIDE LINE ACCESS CODE IS AUTOMAT-
ICALLY DIALLED
Once these settings are in place, you will no
longer need to prefix the outside line access
code every time you enter an external
number. The device will automatically add
the outside line access code in front of
numbers that are the same length or longer
than the configured direct dial numbers.