Saftronics VM10, Инструкция по эксплуатации

Страница: 22 / 98

-20-
! CAUTION
Noise is generated from the drive, motor, and wiring. Ensure that noise
does not cause malfunctions in peripheral sensors and equipment.
Risk of accident! .
(4) Control terminal arrangement, screw size, and tightening torque
Figure 2-3-7 shows the control terminal block arrangement.
Screw size: M2.5; tightening torque: 3.5 lb-
in
(0.4 Nm)
Figure 2-3-7 Control terminal block arrangement
(5) Remove the plate at the bottom of the surface cover before performing drive control wiring and
reinstall it after the wiring as shown in Figure 2-3-8.
Figure 2-3-8 How to pull out the control wiring
FM 30C 30B 30A X3 X2 X1 11 CM REV
FWD
C1 13 12
Plate
Control wiring