SafeHome WS200X, Руководство пользователя, Страница: 43 / 106

www.safehome.dk www.safehome.dk 40
41
Q: Why does my Motion Sensor not respond to movement?
A: Motion Sensor are very sensitive so to preserve battery life the Sensor will go to
“Sleep” after an event has been identified and reported to the panel. This “Sleep” period
lasts 3 minutes, after which, if no activity is detected, the Motion Sensor will again be-
come active and ready to detect other events.
Q: Why does my Motion Sensor keep generating false alarms?
A: If you have a pet, make sure they have not triggered the system. Remember, sensitivity
to pets increases in certain circumstances e.g. the nearer the pet to the Sensor.
When experiencing false alarms, please change the house code settings.
Q: Why can’t I connect Camera to the App?
A: Make sure the hardware has been connected correctly and that camera has not been
connected to any network.
Q: Why can’t I check the video recording from the video page once I receive an
app push notification that the sensor has been triggered?
A: When the camera or any sensor is triggered, Camera will record a 2-minute video
which will be saved in the local SD Card. This video only can be checked after the
recording is finished. You can view the image feed from the Live View first. The recording
will become available 2 minutes later after you’ve refreshed the data.
Q: Why does Camera go off-line and the App always prompt me to remove the device?
A: Depending on your home WiFi signal status and hardware location, Camera could
lose the network connection but it will automatically try to reconnect. You can ignore the
delete device notice and tap on the fresh button at the IP Cam page.
9. Disclaimer
SafeHome ApS is not liable for any errors in the manual in hand.
SafeHome ApS is not liable for faulty products, collateral, incidental or consequential
damage in connection with or arising from the use of SafeHome Wireless Security Sys-
tem.
SafeHome ApS reserves the right to revise and change all aspects of product and manu-
als with no further notice.
This product is not a toy and should not be used as such.
Local and national rules for disposal must be followed.
Please consult local rules, laws and regulation concerning surveillance of public and
private areas or properties. SafeHome ApS can not be held responsible for any violations
in this regard.
Products shall not be operated by children or persons who may be expected not to have
the necessary psyche or physique to operate them properly. User must always be sup-
ported by competent adult user.
For support and further information visit www.safehome.dk
10. Tests and approvals
SafeHome Alarm Starter Kit 01 with HD CAmera are tested
and approved in accordance with the following directives and applicable standards.
Smart Panel
CE
Directives:
2014/53/EU
2014/35/EU
2014/30/EU
Standards:
EN 301 489-1 V1.9.2 (2011-09)
EN 301 489-3 V1.6.1 (2013-08)
EN 300 220-1 V2.4.1 (2012-05)
EN 300 220-2 V2.4.1 (2012-05)
EN 62479 :2010
EN 60950-1:2006+A11:2009+A1:2010+A1
2:2011+A2:2013
EN 50130-4:2011
RoHS
Directive:
2011/65/EU
Motion sensor (PIR),
Remote Control
& Door/Window sensor
CE
Directives:
2014/30/EU
2014/35/EU
2014/53/EU
Standards:
EN 300 220-1 V3.1.1 (2017-02)
EN 300 220-2 V3.1.1 (2017-02)
EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-3 V2.1.1 (2017-03)
EN 62479:2010
EN 50130-4:2011
EN 61000-6-3:2007+A1:2011+AC:2012
EN 60950-1:2006+A11:2009+A1:2010+A1
2:2011+A2:2013
RoHS
Directive:
2011/65/EU
HD Camera
CE
Directives:
2014/53/EU
2014/30/EU
Standards:
EN 300 328 V2.1.2 (2016-11)
EN 300 220-1 V3.1.1 (2017-02)
EN 300 220-2 V3.1.1 (2017-02)
EN 301 489-1 V2.2.0 (2017-03)
EN 301 489-3 V2.1.1 (2017-03)
EN 301 489-17 V3.2.0 (2017-03)
EN 62479:2010
EN 60950-1: 2006+A11:2009+A1:2010+A1
2:2011+A2:2013
EN 50130-4:2011
EN 61000-6-3:2007+A1:2011+AC:2012
RoHS
Directive:
2011/65/EU
Power supplies
Ecodesign
Directive:
2009/125/EC