SafeHome WS200X, Руководство пользователя, Страница: 25 / 106

www.safehome.dk www.safehome.dk 4
5
1. Getting Started
CAUTION!
Difficulty in disarming the Smart Panel in alarm mode may occur when it is powered by
battery alone. This is not a malfunction, and can be resolved by the use of a fresh 9 V
battery and a properly plugged in DC source from the AC/DC adaptor included.
1.1 Introduction to the System
The Wireless Alarm Kit WS-200X is a high quality security system combined with user-
friendly features that allows you to know the state of security of your home at all times.
The System is managed by a Smart Panel, which gathers information from wireless cam-
era and sensors placed inside and at the entry points of your home. If the Smart Panel
detects a security breach, you will be alerted via indicator lights and sounds. For installa-
tion and proper use of the Smart Panel, please familiarise yourself with this User Guide.
1.2 Items included with the System
Please check that all of the following items were included in the package before installing
the System:
• Smart Panel
• Surveillance IP Camera
• Antenna x 2
• Remote Control
• Door/Window Sensor
• Motion Sensor
• AC Adaptor for Smart Panel and Camera
• Double-Sided Adhesive tape for
Door/Window sensor
• Screws & Screw Jackets
• Mounting Bracket for Motion Sensor and camera
• Mounting Template for Smart Panel
• User Guide
System Requirement
• WiFi Signal.
• Smartphone with iOS 7 and above or
Android 4.0 and above.
• Yahoo email (only used for the security system
to send email).
• Receiver email for pictures, can be free chosen.
• For video recording MicroSD Card (up to 32 GB).
• Batteries: Remote: 1 X 12 V Alkaline MN27 (included). Panel: 1 X 9 V Alkaline (non
rechargeable) model E (6LR61) (not included). Door-/window Sensor: 2 X 1.5 V Alkaline
(non rechargeable) model AAA (LR03) (not included). PIR Sensor: 1 X 3 V Alkaline (non
rechargeable) model CR123A (not included).
1.3 Introduction to the Smart Panel
LCD-Screen
& Keypad
Other
9.5 V DC INPUT port For AC Adaptor
Siren output 120dB
Battery Compartment: For 9 V Alkaline Backup battery
4 x Pin Header, 4 x Jumper For setting of house code
Reset Button If you forget the 4-Digit PIN, press “Reset” button and
enter factory default PIN “ 1 2 3 4 ” followed by
to
restore factory setting.
1.4 Introduction to the Smart Panel Sound Alert and
Backlight
MODE Sound (at alarm) Light (at alarm)
1 ARM Siren - 60 sec Red light flashes with triggered zone indica -
tion. To stop- enter your 4-Digit PIN and
press
2 ALERT Ring-Ding-Dong x 1 Green light flashes with triggered zone
indication. To stop- enter your 4-Digit PIN and
press
3 HOME Siren - 60 sec
(ARM Status) Red light flashes with triggered zone indica -
tion. To stop- enter your 4-Digit PIN and
press
Ring-Ding-Dong x 1
(ALERT Status) Green light flashes with triggered zone
indication. To stop- enter your 4-Digit PIN and
press
4 STANDBY Silent Yellow backlight ON for 10 secs. after enter
into STANDBY mode
The siren can also be switched off using the remote control button or APP to open the
padlock.