SafeHome WS200X, Руководство пользователя, Страница: 37 / 106

www.safehome.dk www.safehome.dk 28
29
5.3.3 Link up to the Smart Panel
Tap on the Camera to go to the live view page.
Use one of these four function buttons to link up Camera
to the Smart Panel.
Step Keys Description Note
1
PIN +
You must be in
READY mode
before
programming To make sure you are in READY
mode:
Enter your PIN
Press
, the symbol disap-
pears from the screen.
2
+
Press the buttons
on control panel to
enroll the Camera
into the system.
After pressing
any button (ARM,
HOME, ALERT or
STANDBY) on the
Camera to register
and get an ID num-
ber on Camera LCD display flashes the ID no. of
the Camera to be enrolled. (One
beep indicates that the Camera was
enrolled to the Smart Panel suc-
cessfully)
Note: It is recommended that the
ID No. is marked on the Camera in
case it needs to be deleted at a later
stage
3 Complete the set-
ting After the setting is completed, return
the Smart Panel to STANDBY mode.
Now you are able to keep an eye on your home and control your system remotely from
anywhere in the world using your smartphone.
5.3.4 Locate Camera
5.3.4.1 Determine the location
First, determine the location and monitor area of Camera, which should be placed:
• Neer an electrical outlet or use an extension cable.
• Not far away from the smart panel. For better performance, the distance between the
Camera and the smart panel is suggested to be within 10 meters. If it is beyond 10
meters, users have better carry out a test to make sure effective operation.
• In the most vulnerable rooms or near key points.
• Where better RF performance can be achieved.
• Away from direct sunlight.
• Away from extreme temperature sources (radiators, air conditioners etc.).
• Away from extremely humid & dusty environment.
5.3.4.2 Wall/ceiling mounted:
Mount Camera with the screws provided:
• Hold the enclosed mounting template against the wall at the selected location and
mark the points for drilling.
• Drill the holes and insert the wall plugs.
• Match the back plate of Camera against the screws and hang it up.
A wall mounting unit can be used for wall / ceiling mounting if you do not want to hang
the camera directly:
• Hold the fixed part (with two drilling holes) of the mounting unit against the wall at
the selected location and mark the points for drilling.
• Drill the holes and insert wall plugs to the fixed wall mounting unit.
• Match mounting bracket hole at the bottom of Camera to the wall mounting unit, and
screw it in.
• Aim Camera at the area where it is supposed to monitor by adjusting the mounting
bracket’s rotating screws.
5.3.4.3 Adjust the camera focus
If the camera’s view or focus is unsatisfactory after it has been mounted, you can adjust
the camera lens by:
• Remove the lens cover by rotating anticlockwise a little.
• Rotate the ring of the lens clockwise or anticlockwise while watching the app in live
view to optimize the view.
• Fix the lens cover back on.