
www.safehome.dk
www.safehome.dk
12
13
G. Zone Settings
Programming each zone in ARM mode:
Step
Keys
Description
Note
1
PIN +
You must be in
READY mode
before
programming
To make sure you are in READY
mode:
Enter your PIN
Press
, the symbol
disap-
pears from the screen.
2
+
Press the two but-
tons in succession
to select the zones
to be activated dur-
ing ARM
Toggle 1, 2, 3, 4, 5, 6, 7, 8 to turn
each zone ON or OFF
If no number appears, the zone is
turned OFF
The Smart Panel will display the
below image when all zones are
turned on:
3
Complete the set-
ting
After the setting is completed, return
the Smart Panel to STANDBY mode.
H. Triggers in ARM Mode
Example: Zone 1 trigger:
Step
Description
Note
1
System trigger
One beep indicates that the system is triggered
2
Entry delay 30
seconds
There are 30 seconds of entry delay time with visual count
down for disarming.
Once an intrusion has occurred (zone triggered under
ARM status) and entry countdown is completed, alarm
siren will sound 1 minute and the Smart Panel (All in RED)
flashes every 1.5 seconds with triggered zone indication
until the system is disarmed.
To disarm the system, enter the 4-Digit PIN or press
on the Remote Control to exit the current mode.
3
Return to ARM
Mode after the
initial triggering
After this initial triggering, the alarm will immediately sound
without delay, if any sensors are triggered.
3.3.3 ALERT Mode
If in ALERT mode, the Smart Panel chime will sound and Smart Panel flashes GREEN
every 1.5 seconds with triggered zone indication when the system detects a visitor in the
protected area.
ALERT mode default setting:
Zone
Status (MODE)
Door/Window Sensor
1
ALERT
Motion Sensor (PIR)
8
ALERT
Camera
6
ALERT
A. Entering ALERT Mode
On the Remote Control: Press
to activate.
On the Smart Panel: First make sure the Smart Panel is in READY mode by following
steps below for entering into ALERT mode:
Step
Keys
Description
Note
1
PIN +
You must be in
READY mode be-
fore programming
To make sure you are in READY
mode:
Enter your PIN
Press
, the symbol
disap-
pears from the screen.
2
From READY mode
to ALERT mode
The System will enter ALERT Mode.
If the Zone is enabled, a number will
appear as displayed in the image
below:
B. Exiting the ALERT mode
On the Smart Panel: Enter your 4-Digit PIN followed by f
to exit ALERT mode.
On the Remote Control: Press
to exit ALERT mode.
Содержание WS200X
