Saf-Fro DIGISTEEL 250C, Руководство оператора

Страница: 18 / 868

English 14 English
Table 3 The default settings of basic menu
Parameter Definition
Inductance – controls the arc characteristics
when short-arc welding. Increasing Inductance
higher than 0.0 provides a crisper arc (more
spatter) while decreasing the inductance less than
0.0 provides a softer arc (less spatter).

Regulation range: from -10.0 to +10.0.

Factory default, Pinch is OFF.
Torch trigger mode (2-step / 4-step) - changes
the function of the torch trigger.

2 Step trigger operation turns welding on and
off as direct response to the trigger. Welding
process starts when the torch trigger is press.

4-Step mode allows to continue welding, when
the torch trigger is released. To stop welding,
the torch trigger should be pressed again.4-step
model facilitates to making long welds.
Run-in WFS – sets the wire feed speed from the
time the torch trigger is pressed until an arc is
established.

Regulation range: from minimum to maximum
of the wire feed speed.

Factory default, Run-in WFS is turned off.
Burnback Time – amount of time that the welding
is continue after the wire stops feeding. It prevents
the wire from sticking in the puddle and prepares
the end of the wire for the next arc start.

Burnback Time is set automatically (0,07s)

Regulation range: from 0s (OFF) to 0,25s