SAESHIN TRAUS SIP20, Руководство пользователя

Страница: 12 / 28

10
1. Motor Connection
: Insert the motor connector. Check if the holes and pins of motor connector are lined-up.
(Place the arrow mark on top. See the picture below.)
- When connecting the motor, foot controller and power cord,
please make sure the power is off.
(Otherwise, it might cause a malfunction.)
CONNECTION OF EACH PART
2. Foot Controller Connection
: Insert the foot controller connector. Check if the holes and pins of foot controller connector are lined-up.
Then screw the connector lock.
3. Power Cord Connection
: Insert the power cord into the main power inlet of the control box.
③ ① ② ④
⑤
connector lock.
15
Torque
ON
FWD
20:1
N.CM
Set up Set up
N.cm
RPM
RPM
Set
80
SETUP
( O ) ( X )