SAESHIN TRAUS SIP20, Руководство пользователя

Страница: 20 / 28

18
1. Please read the notice below before operating the product.
① Check the connection of all cords and correct operation when powering-on.
② Check if the ground connection is safe.
③ Make sure to check any contact part to patient.
④ Check the voltage.
⑤ Check the sterile condition of autoclavable parts. If the packaging of the sterilized product is damaged,
discard the product.
- Irrigation Tube
- Y-Tube
- A-sleeve
2. Please read the notice below during the product use.
① Constantly check the status of the product and patient during surgery.
② When product or patient has any problem, stop the operation for the patient’s safety and
take the proper action.
③ Do not let patient approach or touch the product.
3. Please read the notice below after operating the product.
① Do not put any physical pressure on the all cords.
4. When the products are not using for a long term, please be advised to the followings.
① Turn off the power and unplug the cord. Check the cord regularly and replace it when
it is damaged.
② Clean and sterilize.
③ Keep the products in the recommended condition.
ATTENTION
3. Lubrication
Lubrication Product List
Angle handpiece
Lubrication method
Insert the nozzle to motor assembly part(the end part of angle) and spray lubricant 2~3 seconds.
- Do not insert the oil into the motor. It damages the bearing or causes fever.
- If the continuous operation, please put the oil every an hour.
- When lubrication, please hold the angle handpiece firmly because the angle handpiece can go out
by the spray pressure.
- Caution: Lubrication spray present combustible hazard.
- Use FDA approved lubricant. (K052700 equivalent lubricant is available.)
Spray Nozzle
Spray
Spray Nozzle
Spray
Optic type
Non-optic type