SAESHIN TRAUS SIP20, Руководство пользователя

Страница: 10 / 28

8
15
Torque
ON
FWD
N.CM
Set up Set up
N.cm
RPM
RPM
Set
80
SETUP
1
2
3
4
5
6
7
8
9 11
10 12
1. Gear Ratio Display
: It shows current set of gear ratio.
2. Rotation Direction Display
: It shows the selected direction.
3. Irrigation Volume Display
: It shows selected irrigation stage. The stage is 0 to 5 (Stage 0 = No volume / stage 5 = Maximum volume).
Number of Water drop shows the volume stage.
4. Optic Display
: The optic function is working when bulb symbol display on the screen.
* Optic function is only operated with optic angle handpiece.
* When press the speed control pedal on the foot controller after operating the optic function, LED is turned on.
5. Program Number Display
: It shows current set of program number. It display Program 1 to 9 and can save 9 programs. After restart
the device, it displays program number 1.
6. RPM Menu Display
: When the corresponding menu is selected, the RPM can be adjusted using the and buttons.
7. Torque Menu Display
: When the corresponding menu is selected, the torque can be adjusted using the and buttons.
8. SETUP Menu Display
: When the corresponding menu is selected, it can be move to setup menu using the button.
9. RPM Display
: It shows the initial setup RPM when it is on standby. The actual value is displayed in real-time during operation.
The number is same as set RPM level when pressing foot controller to the end.
10. Torque Display
: It shows the setup torque value. If an actual load is higher than set torque value, the set torque value is
on the screen and the motor is stopped automatically with ‘E3’ on the screen and beep sound.
11. Foot Controller Gauge Display
: The gauge indicates the degree to which the foot controller is pressed during operation.
12. Torque Gauge Display
: The gauge indicates the actual load value during operation.
- Be careful that the LCD on the control box could be damaged by impacting or dropping.
LCD WINDOW
20:1