SAESHIN Traus ENDO, Инструкция по эксплуатации

Страница: 10 / 20

1. Turn on the power by pressing down the Power button ( ).
2. Press the Program button ( ) to find the appropriate program for your file.
3. If no program has b een set, set as below.
※ The program can be used from 1 to 5 and the user can set up to the desired value.
4. Press the Up/Down buttons ( ) to set the rotation speed you want to use..
5. Press the Select-S button ( ) to set the gear ratio, torque and auto reverse mode you want to use.
Each mode uses the Up/Down buttons ( ) to set the desired value.
6. After setting, press and hold the Program button ( ) for 1 second or longer to memorize the program with a beep.
7. Press the Motor ON/OFF button ( ) to operate.
8. When the treatment is complete, press the Motor ON/OFF button ( ) to stop the operation and
press the Power button ( ) to turn it off.
OPERATION PROCESS
■ Battery charge
1. Connector the power cord to the power cord connection socket on the back of the charger.
2. Insert the power cord and plug in.
3. Turn the power switch ON. At this time, the power lamp is turned on and a beep sounds.
4. Plug the motor handpiece into the charger with it facing forward.
The charging lamp lights up and charging starts.
5. Orange light is on during charging and green light is on when fully charged.
※ Orange light blinks in case of short circuit or battery failure. In this case, charge new battery after replacing it.
If the same symptom occurs after the battery is replaced, consult your dealer or manufacturer.
* If you do not press the program button for more than 1 second and you do not hear a beep, the program
will not be saved. In this case, the initially stored value is retained.
* When the power is turned off after driving the handpiece, the last use status is saved.
Please use it after confirming the setting value you want to use.
* The power will turn off automatically after 4 minutes without ON/OFF button operation. (Auto power off function)
However, if the motor is running regardless of whether it is used, the power will not be turned off automatically.
- Never use the charger for other purpose except the motor handpiece.
- If the battery is left in the motor handpiece for a long time and then charged, the battery may not be charged.
Charging
Fully charged Battery failure/short circuit
8