SAESHIN Traus ENDO, Инструкция по эксплуатации

Страница: 6 / 20

<Feature>
- Simple interface design for easy control
- Freedom of activity during operation by wireless handpiece
- Ergonomic and compact body
<Program function>
- 1~5 programs are available to set
- 5 memory programs of (gear ratio, torque, rpm, auto reverse ) are available to set.
<Setting torque limit function>
- During the treatment, if the actual load exceeds the set torque value, the motor will reverse rotate automatically.
At this time again of exceeding the existing set torque value, E1 will appear and the rotation will stop automatically.
<Auto reverse mode>
- Users can choose auto-mode according to operation condition.
- If the load reaches to torque limit value, it start reverse with “beep” sound. At this time,
tow auto reverse modes are available.
PRODUCT FEATURES & ADCANTAGES
* Torque :
- Gear Ratio : 4:1, 10:1, 16:1, 20:1, 32:1
- The free-running speed of the angle handpiece shall be in accordance with the manufacturer’s
instructions at a tolerance of ±10% as specified. (Refer to ISO 14457)
- Prophy products must be used at 4:1 gear ratio.
Gear Ratio
rpm
Gear Ratio
rpm
500 ~ 2,300 rpm 200 ~ 1,000 rpm 100 ~ 600 rpm 100 ~ 600 rpm
4:1 10:1 16:1 20:1
100 ~ 600 rpm
32:1
-- (MAX) -- (MAX) 1 ~ 4 N·cm 1 ~ 4 N·cm
4:1 10:1 16:1 20:1
1 ~ 4 N·cm
32:1
* rpm
Auto stop
: Motor handpiece move in reverse movement. After removing the load, handpiece stops.
To operate it forward movement, pass On/Off button again.
2. Auto reversing
: If the load is removed after auto reverse rotation, it returns to the normal rotation again.
* Operation within the
setting torque value
Forward
* Reverse rotation when exceeds
setting torque value
Reverse
* Stop when a load is removed
Stop
* Operation within the
Setting torque value
Forward
* Reverse rotation when exceeds
setting torque value
Reverse
* Forward rotation when a
Load is removed
Forward
No display
4