Saeco CRISTALLO 400, Использование и обслуживание

Страница: 8 / 64

8
English
Fig. 2
Data plate
The Maintenance Technician must carefully read and respect
the safety warnings contained in this manual so that every
intervention concerning installation, starting up, use and
maintenance will be safely carried out.
It is the Maintenance Technician’s absolute responsibility to
give the keys to access the inside of the vending machine to
another operator (Supply Operator), provided that the
Maintenance Technician bears full responsibility for all work
carried out.
This manual is an integral part of the machine and must be
always read carefully before performing any operation.
2.2 Description and intended
use
The vending machine is intended for automatic distribution
of coffee and hot beverages (decaffeinated coffee,
cappuccino, chocolate, etc.) and is programmable for every
single type of dispensing dosage. The instant products must
be consumed immediately, and cannot be preserved for a
long time.
Any other use is to be considered improper and therefore
dangerous.
Do not place any product inside the distributor which may
be dangerous as a result of unsuitable temperatures.
Important
Improper use of the vending machine invalidates all
warranties. The Manufacturer declines any liability for
damage to property or injury to persons.
Improper use also includes:
- any use of the vending machine other than the intended
use and/or according to procedures which are not
described in this publication;
- any intervention on the vending machine which differs from
the instructions given in this publication;
- any alteration of components and/or safety devices
without prior consent of the Manufacturer or carried out
by personnel not authorized for such operations;
- any location of the appliance which is not recommended
in this manual.
2.3 Vending Machine
Identification
The vending machine is identified by the name, model and
serial number which can be found on the relevant data
plate (Fig. 2).
The following data can be found on the plate:
- name of Manufacturer;
- marks of compliance;
- model;
- serial number;
- year and month of manufacture;
- supply voltage (V);
- supply frequency (Hz);
- electrical power consumption (W).
Warning
It is strictly forbidden to tamper with or modify the data plate.
Important
When contacting the AUTHORIZED CUSTOMER SERVICE
CENTRES always refer to this plate and its relevant data.