Saeco CRISTALLO 400, Использование и обслуживание

Страница: 60 / 64

60
English
Cause Code Message Registered in Effect Error Automatic Error
ERROR LOG resettable reset at resettable
as error by means of restarting from
or warning “Automatic 5-key
Reset” keypad
procedure
water level low in air break 1 “ NO WATER 01” W/E blocked YES* YES YES
no coffee dosing unit level detected
(coffee not available?) 2 “COFFEE NOT AVAILABLE” E coffee blocked YES NO YES
no movement of group gearmotor detected 3 “BREWING UNIT BLOCK03” E coffee blocked YES* YES YES
no movement of group gearmotor detected 4 “BREWING UNIT BLOCK04” E coffee blocked YES* YES YES
no flowmeter pulses detected 5 “ NO FLOWMETER 05” E blocked NO NO YES
no movement of dispensing arm detected 6 “ ARM DISP. BLOCKED06” E blocked NO YES YES
no movement of dispensing arm detected 7 “ ARM DISP. BLOCKED07” E blocked NO NO YES
no cups detected 8 “ NO CUPS 08” E blocked —- YES YES
drip tank full 9 “DRIP TANK FULL 09” E blocked YES* YES YES
no movement of cup release detected 10 “ CUP DISP. BLOCKED10” E blocked YES* YES YES
no movement of stirrer ejector detected 11 “SPOON DISP. BLOCKED “ E blocked NO NO YES
no movement of stirrer ejector detected 12 “SPOON DISP. BLOCKED “ E blocked NO NO YES
reading of temperature sensor out of range 13 “TEMP. SENSOR ERROR13” E blocked NO YES YES
reading of coffee temperature sensor out of range 14 “TEMP. SENSOR ERROR14” E blocked NO YES YES
e2prom corrupted 16 “ E2CHECK ERROR 16” E blocked NO YES YES
no movement of cup holder detected 17 “BASKET CUP BLOCKED17” E blocked NO NO YES
no brew group detected 20 “ BREWING UNIT N/A 20” E coffee blocked YES* YES YES
no dreg drawer detected 21 —— E —- YES YES
abnormal flow detected in coffee brewing 22 “ ABNORMAL FLOW 22” W/E coffee blocked YES NO YES
pump timeout 23 “ PUMP TIMEOUT 23” W message only YES
no instant product boiler level detected 24 “BOILER FILLING ERR24” E blocked —- —- YES
Saeco card without timekeeper detected 25 “ TIMEKEEPER REQUIRED” E blocked NO YES YES
setting of decimal point position detected not
consistent with payment system 31 “DECIMAL POINT ERROR “ E blocked NO YES YES
credit management restarting message 32 —— E message only —- —- YES
pressing of CPU P3 key for 15 seconds detected 33 “ OUT OF SERVICE 33” E blocked NO NO YES
Normal operation restored message after
abnormal flow 34 —— W message only —- —- YES
MDB slave error detected 35 —— W message only YES
coffee boiler heating slow 36 “ BOILER1 ERROR 36” E blocked NO YES YES
instant product boiler heating slow 37 “ BOILER2 ERROR 37” E blocked NO YES YES
CRC flash error 38 “ CRC ERROR 38” E blocked NO NO NO
BDV message 41 —— E message only —- —- —-
watchdog intervention 72 —— YES message only
change-giving coiner error message 80 —— YES message only —- —- —-
GSM modem error message 81 —— YES message only —- —- —-
boiler triac overtemperature detected 82 —— YES message only —- —- —-