Saeco CRISTALLO 400, Использование и обслуживание

Страница: 59 / 64

59
English
Cause
The vending machine is in stand-by.
Product dispensing in progress.
Dispensing outlet door open.
SUGAR QUANTITY to be dispensed
with the beverage.
Preselection of the second or third set
of beverages activated.
The coffee beans hopper is empty.
A Type of product not available.
The level of coin stacking tubes is
below the preset limit.
No dialogue with the selected payment
system is detected by the VM.
Rimedio
Close the door
Carry out the supply (see section 7).
Add coins into the change-giving
coiner.
Check for dialogue with the payment
system.
Messaggio
CRISTALLO 400/600
WAIT FOR PRODUCT
CLOSE DOOR
SUGAR 1-x
SUGAR 2-xx
SUGAR 3-xxxxx
SUGAR 4-xxxxxxx
PRESELECTION xx-xx
CAFFEE NOT AVAILABLE
NOT AVAILABLE
NO CHANGE AVAILABLE
NO LINK
Cod. errore
/
/
/
/
/
/
/
/
/
11 DISPLAY MESSAGES
This section shows the display messages:
- during standard operation;
- in case of a fault (error messages).
11.1 Messages during operation
The table below shows a list of messages displayed during
the standard operation.
11.2 Error messages
During operation the vending machine is able to detect a
series of faults that may lead to a full or partial blockage of
its functions. In case of total blockage, the first line on the
display will show the out-of-service message, while the
second line will display the fault code; an example is given:
In this case the vending machine is out of service. To bring
it back into working order again, it is necessary to remove
the cause of the fault and possibly carry out the error reset
procedure described at 8.3.3.
CALL FOR ASSISTANCE
OUT OF SERVICE 25
FAILURE CODE