S/C Black BLK-IPE101, Руководство пользователя

Страница: 7 / 34

5 H.264 Network Video Encoder
SECTION 2: INSTALLATION AND SETUP
SECTION 2
Installation and Setup
2.1 What’s in the box
Your encoder includes the following:
•
BLK-IPE101 encoder
•
12 V DC power adapter
•
9-pin terminal blocks (2)
•
Hardware installation kit including mounting brackets (2), screws (4), and wall inserts (2)
•
CD mini disk with application software, software manual, and encoder manual (this document)
2.2 Tools you need
To install the encoder, you will need:
•
Phillips #2 screwdriver
•
Drill 1/4” drill bit
•
PC with Microsoft
®
Windows
®
XP SP3 or newer
2.3 Find an IP address for your encoder
Devices attached to an Local Area Network (LAN) are each assigned unique address (IP address) that
they use when sending messages with each other. No two devices on a single Ethernet network can have
the same IP address. Otherwise, conflicts will occur.
Your IP encoder is pre-configured with a static IP address, subnet mask, and gateway setting:
IP address: 192.168.0.100
Subnet mask: 255.255.255.0
Gateway:
192.168.0.1
Usually these settings are changed during installation to ones more compliant with the network
configuration.
Use the following procedure to determine a compliant IP address to assign to your encoder. If connecting
your encoder to a large enterprise network, consult with your network administrator before attaching the