S/C Black BLK-IPE101, Руководство пользователя

Страница: 9 / 34

7 H.264 Network Video Encoder
SECTION 2: INSTALLATION AND SETUP
NOTE
The Ethernet adapter data you see by using ipconfig will probably be different from that
shown in the example above. If you are using Windows Vista or Windows 7, the IP address
is identified as the “IPv4 Address.”
Table 2. PC/Encoder network settings
Computer (PC) Encoder
IP Address
Subnet Mask
Default Gateway
CAUTION

If connecting your encoder to an enterprise network, consult with your network
administrator for the encoder IP address, subnet mask, and default gateway.
2. At your PC, find an IP address on your network that is not in use:
a. Write down the EXACT IP address of your PC up to the third/last period. Using the example
shown above, this expression is: 192.168.1.
b. After the third period, include any number between 1 and 256 that is different from the one
in your PC’s IP address, 168. As a first try, let’s choose 200, which will form the IP address
192.168.1.200.
c. Next, use the ping command in the DOS window to see if this IP address is in use on your
network. The format of the ping command is:
ping <IP address>
To test this IP address, enter
ping 192.168.1.200
. Any reply received from the ping indicates
that a device on the network is already using this IP address and you can connect to it.