Spiral
®
SST and STT Prewire Installation Manual
Spiral
®
SST and STT Prewire Installation Manual
■
1072124-0
■
Rev 03
■
01/22
26
(optional) How to install the slanted top hood cover
It is recommended that you
do not use power tools
for these steps.
Overtorquing screws can damage the riveted nuts that secure them.
1
Locate
the top hood cover panels and splice brackets in their crate.
▪
-L and -L/R doors may have 2, 3 or 4 panels, -S and -S/R doors may have 2, 3, 4 or 5 panels.
Locate
the flashing. There should be two long segments and two short side segments.
Locate
the hardware in the small parts box.
2
-L and -L/R doors:
install the
end splice bracket.
Do this
on both sides
of the head assembly.
Splice bracket
End splice bracket
Flashing
-L, -L/R
-S, -S/R
Top hood
cover panels
SMALL PARTS
2
01900820
T40
3
-L and -L/R doors:
install the rest of the splice brackets.
4
-S and -S/R doors:
install the end splice bracket.
Do this
on both sides of the head assembly.
5
-S and -S/R doors: finish anchoring
the wall mount bracket through the splice bracket.
Do this
on both sides of the head assembly.
T40
T40
SMALL
PARTS
4
4
01901508
01900820
13mm
13mm
SMALL PARTS
1
01900820
T40
KEEP
REUSE
2
2
1
1
13mm
Use hardware
saved in Step 10
on page 6.
Rear screw connects to
flanged nut
.
Front screw connects to
riveted nut
.
Anchoring
hardware
Use at least one
anchor point through
the splice bracket
and the wall
mount bracket.
