![background image](http://html1.mh-extra.com/html/ryobi/p747/p747_operators-manual_1505857008.webp)
8 — English
MAINTENANCE
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which can result in serious personal injury.
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts can create a hazard or cause
product damage.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
NOTE: ILLUSTRATIONS START ON PAGE 10 AFTER
FRENCH AND SPANISH LANGUAGE SECTIONS.
OPERATION
INFLATING WITH THE HIGH PRESSURE AIR
HOSE AND ACCESSORIES
See Figures 10 - 12, page 12.
The high pressure air hose can be used with the provided
adaptors to inflate a variety of items.
To install accessory, thread adaptor (or needle) into air
chuck. Inflate to desired pressure.
Remove accessory after inflating and return to storage
area on the side of the unit.
ACCESSORIES STORAGE
See Figure 13, page 12.
When not in use, adaptors and needles provided with the
inflator can be placed in the storage area located on the
right side of the unit.
HOSE STORAGE
See Figures 13 - 14, page 12.
When not in use, the hoses provided with the inflator can be
placed in the storage areas located on both sides of the unit.