
Rear View Safety, 1797 Atlantic Ave., Brooklyn NY 11233
800.764.1028 [email protected]
9
WIRING CONNECTIONS AND COMPONENT MOUNTING
Component mounting:
•
Rear camera will be mounted with machine screws, nuts, and washers. If there
is no access to the backside of camera location, then self-drilling screws can
be used to mount the camera bracket.
•
Side cameras must be mounted with the supplied machine screws, nuts, and
washers.
•
Each camera requires 3/4” hole for the camera cable.
•
Monitor mounting on step vans will depend on location (most will mount
overhead) and use the “U” bracket.
•
Monitor requires a 3/4” hole for the cable or use an existing hole in shelf if
present.