18
©
Rear View Safety
CABLE ROUTING – STEP VAN
Route the upper sensor cable across to the passenger side upper backup sensor.
Be sure to secure the cable so that it cannot come in contact with the door
spring, cables or door. If using sticky tabs to attach zip ties, add screw in center
or add silicone to the perimeter of the sticky tab. The double sided tape will fail!
Route the rear camera cable towards the driver side and secure along with the
passenger side sensor cable.
Bundle the excess cables vertically in the driver side corner of the cargo box.
Note: Be sure that cables cannot be damaged by shifting packages
.
Route loomed cable and wires through existing wire channel or body framing to
the front of the truck toward the passenger bulkhead and then to the driver’s side
A pillar.
Route the rear camera cable past the bulkhead and through the horizontal
channel over the driver’s side door/window.
If mounting the monitor to the overhead shelf:
•
Route the rear camera cable over the shelf towards the center.
•
Route the left side camera cable up the vertical channel at the left front side
(B pillar) of the door/window and towards the center.
•
Route the right side camera cable up the vertical channel at the right front
side (B pillar) of the door/window and towards the center.
If mounting the monitor to the dash:
•
Route the rear camera cable over the shelf towards the center.
•
Route the left side camera cable up the vertical channel at the left front side
(B pillar) of the door/window and towards the center.
•
Route the right side camera cable up the vertical channel at the right front
side (B pillar) of the door/window and towards the center.